Jack seem to not work fine

sirio81

Posted: Thu, 05/01/2008 - 09:55

I set the input and output interfaces hw:0. My audio card works with alsa, i know it. When I start jack I obtain many and continius xrun messages like ++++ alsa_pcm: xrun of at least 0.0034 msec. I tried to play a wav file with totem, it plays it but no sound exit from the speaker. I checked the volume with alsa mixer and it's at maximum. I also increased the Master in the jackEQ...no resaults. Any suggestions? Is there a repository of 64 studio or do I have to use only to etch repository to update my distro? my lspci 00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 04) 00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port (rev 04) 00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 04) 00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04) 00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 04) 00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 04) 00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 04) 00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 04) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d4) 00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 04) 00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 04) 00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 04) 01:00.0 VGA compatible controller: nVidia Corporation Quadro NVS 110M / GeForce Go 7300 (rev a1) 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller (rev 13) 02:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b3) 02:01.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 08) 02:01.2 Generic system peripheral [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 17) 02:01.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 08) 02:03.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network Connection (rev 05) 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)

Add new comment

Hi, I tried to create the

sirio81
Joined:05/01/08

Posted:Mon, 05/26/2008 - 07:03

Hi, I tried to create the file /etc/modprobe.d/snd-hda-intel in 64studio but nothing has changed. Still no sound and still too many x-run messages from jack.

I'm back again. I updated

sirio81
Joined:05/01/08

Posted:Tue, 06/10/2008 - 19:55

I'm back again. I updated everything by synaptic. Something has gone better: jack X-run messages are not coming out continiusly when there are not sound application working. If I open totme plaing a wav file, xrun messages start to popup often (less then before but often). The speaker are still not working. If I insert the headphone I hear the music but it jumps/scratchs. Any idea?

Asus A6Vm headset

skullnotions
Joined:09/29/07

Posted:Wed, 05/07/2008 - 13:12

There doesn't seem to be much about linux Asus A6Vm jack? googled: Asus A6Vm jack xruns (6 hits)? googled: linux Asus A6Vm sound 2nd post Problem solved link takes you to a headphone Alsa Mixer workaround that seems to work on Asus A6VM-A laptop http://ubuntuforums.org/showthread.php?t=624929 edit; I can find very little regarding Asus A6Vm linux. Here is a link to help generally with drivers. paste your result of $ lspci -n http://kmuto.jp/debian/hcl/index.cgi This one might configure and is close to 64studio, I know it creates .asoundrc http://linux.softpedia.com/progDownload/Studio-to-Go-Download-30144.html dave

Try the snd-hda-intel file

Quentin Harley
Joined:05/24/07

Posted:Tue, 05/06/2008 - 15:36

64studio is Etch, in most ways. If it doesn't work you at least tried...

About your computer.

skullnotions
Joined:09/29/07

Posted:Mon, 05/05/2008 - 22:41

Hi sirio81, >>> Can you post us some more info about your system? Is this a Laptop? with a USB Sound card? can you tell us more about these? Which version of 64studio do you have installed? sirio81> I set the input and output interfaces hw:0. $ cat /proc/asound/modules 0 snd_hda_intel (on-board sound) 1 snd_usb_audio (usb sound device) $ lsmod | grep snd snd_hda_intel snd_usb_audio Both modules are loading at boot up. sirio81> My audio card works with alsa, i know it. How?....Can you hear "anything" with 64 studio, or is this with another distr'o? Below is some information about Fireware. Fireware and qjackctl, Click the Setup button. *>> Periods/Buffer set to 3 *>> Driver freebob (this can be listed as "ffado" in up to date distros) *>> Interface The first soundcard in your system is called [hw:0]. Select the "correct" hardware from the drop down list. Ref: Daniel James article linuxformat magazine issue 102. Ref: Audio interfaces However, we didn't include the FreeBoB driver in the 64 Studio 1.0 release, so you'll need to get the 2.0 release or later to have your FireWire interface working out of the box. Ref: From Here http://64studio.com/faq_user http://64studio.com/quickstart_jack Xruns - Overruns near the bottom of the page http://64studio.com/manual/audio/jack dave

> Is this a Laptop? Yes,

sirio81
Joined:05/01/08

Posted:Tue, 05/06/2008 - 12:31

> Is this a Laptop? Yes, it's an Asus A6Vm > with a USB Sound card? No. I'm using the integrated audio card. Generaly I work with mepis 7.0 and in kmix, it shows "HDA Intel" and "USB2.0 Video". I never understood why but it does. > can you tell us more about these? I always have had probelms hearing the sound from headset or using the microphone because but the speaker were always working but the speaker were always workin, with all distributions. Only with mepis 6.5 (and alsa 1.0.13) and later versions, the side jack started to work. I made them work also on a debian etch installation creating the file /etc/modprobe.d/snd-hda-intel that contains options snd-hda-intel position_fix=2 options snd-hda-intel model=auto I tried many times with model=asus but it doesn't work!!!! Recently I tried a live distribution called open mamba and it use jack and it was working. (I dont remember if I tested also the jacks, but the speaker sure were working). If I find out the cd il make some more tests. > Which version of 64studio do you have installed? 2.0 (actualy without any updates). I have not created the file /etc/modprobe.d/snd-hda-intel in 64studio because I don't know how jack interact with alsa.

Jack system settings

skullnotions
Joined:09/29/07

Posted:Fri, 05/02/2008 - 13:49

The 64studio repository should be set already, to check go to Menu > System Tools > Synaptic When Synaptic is loaded go to > Settings > Repositories > and see which repositories are enabled. Can you post us some more info about your system. and post back what is returned when you try these in a terminal: $ lspci | grep -i audio $ cat /proc/asound/modules $ cat /proc/asound/devices $ lsmod | grep snd All of these can be read as your user $ The last one should show which snd modules are loading at boot. Also try dmesg, this will tell you a great deal about your system $ dmesg Try booting a live cd (knoppix mepis or dsl) and take note of the verbose message as they boot. dave.

Here are the

sirio81
Joined:05/01/08

Posted:Mon, 05/05/2008 - 11:32

Here are the informations: sirio81@64studio:~$ lspci | grep -i audio 00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 04) sirio81@64studio:~$ cat /proc/asound/modules 0 snd_hda_intel 1 snd_usb_audio sirio81@64studio:~$ cat /proc/asound/devices 0: [ 0] : control 1: : sequencer 16: [ 0- 0]: digital audio playback 17: [ 0- 1]: digital audio playback 24: [ 0- 0]: digital audio capture 26: [ 0- 2]: digital audio capture 32: [ 1] : control 33: : timer 56: [ 1- 0]: digital audio capture sirio81@64studio:~$ lsmod | grep snd snd_rtctimer 4768 0 snd_usb_audio 76512 0 snd_usb_lib 16768 1 snd_usb_audio snd_seq_dummy 4996 0 snd_seq_oss 32768 0 snd_seq_midi 9248 0 snd_seq_midi_event 8192 2 snd_seq_oss,snd_seq_midi snd_hda_intel 245912 4 snd_seq 48976 9 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_m idi_event snd_pcm_oss 40992 0 snd_mixer_oss 17280 1 snd_pcm_oss snd_rawmidi 23712 2 snd_usb_lib,snd_seq_midi snd_pcm 73732 5 snd_usb_audio,snd_hda_intel,snd_pcm_oss snd_seq_device 8972 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq,s nd_rawmidi snd_hwdep 10116 1 snd_usb_audio snd_timer 22148 3 snd_rtctimer,snd_seq,snd_pcm snd 51300 21 snd_rtctimer,snd_usb_audio,snd_usb_lib,snd_seq_ dummy,snd_seq_oss,snd_hda_intel,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_rawmidi,sn d_pcm,snd_seq_device,snd_hwdep,snd_timer soundcore 9056 1 snd snd_page_alloc 10760 2 snd_hda_intel,snd_pcm rtc 13592 1 snd_rtctimer usbcore 125832 5 snd_usb_audio,snd_usb_lib,ehci_hcd,uhci_hcd - using dmesg i notice this message: ALSA /usr/src/modules/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/hda_intel.c:558: hda_intel: azx_get_response timeout, switching to polling mode... Thanks

Company

Community

Developers

Endorsements

Search

User login