New installation of 64Studio--Noted problems I need assistance with.

  • jukingeo
Posted: Sat, 07/26/2008 - 01:04
Hello all, I just recently installed 64Studio and I originaly had Ubuntu Studio. I mad e the move here because I read all the reviews on 64Studio and supposedly it is a more refined and overall better operating system than Ubuntu Studio. At any rate today is my first day poking around and checking things out. I have found many problems right off the bat. I am hoping there is a quick solution for each. First things first. This is my system: Dell Dimension 4600 P5 2.8ghz, and 1.5gig ram. Two hard drives, one 80gig IDE (Windows drive) and one SATA 500gig drive (64Studio and storage). I have a Sound Blaster Live installed (Dell OEM) and I do have a firewire interface. The problems I noticed are these: 1) No matter what I type in forums whether it is spelled correctly or incorrectly, I get a red line underneath it. So something is wrong with the systems spell checking. 2) Jack doesn't seem to be working properly. When I click on connections I notice nothing listed for the audio device. However under the MIDI connections there are devices listed. If I push start on Jack, I get this in Jack's message console: 20:54:33.671 Patchbay deactivated. 20:54:33.765 Statistics reset. JACK tmpdir identified as [/dev/shm] 20:54:33.849 MIDI connection graph change. 20:54:33.982 MIDI connection change. 20:54:37.310 Startup script... 20:54:37.310 artsshell -q terminate JACK tmpdir identified as [/dev/shm] can't create mcop directory Creating link /home/geo/.kde/socket-64studio. 20:54:37.590 Startup script terminated with exit status=256. 20:54:37.592 JACK is starting... 20:54:37.594 /usr/bin/jackd -R -dalsa -dhw:0 -r48000 -p512 -n4 20:54:37.601 JACK was started with PID=4574 (0x11de). jackd 0.103.0 Copyright 2001-2005 Paul Davis and others. jackd comes with ABSOLUTELY NO WARRANTY This is free software, and you are welcome to redistribute it under certain conditions; see the file COPYING for details JACK compiled with System V SHM support. loading driver .. apparent rate = 48000 creating alsa driver ... hw:0|hw:0|512|4|48000|0|0|nomon|swmeter|-|32bit control device hw:0 configuring for 48000Hz, period = 512 frames, buffer = 4 periods ALSA: final selected sample format for capture: 16bit little-endian ALSA: got smaller periods 2 than 4 for capture ALSA: cannot configure capture channel cannot load driver module alsa no message buffer overruns 20:54:37.708 JACK was stopped successfully. 20:54:37.710 Post-shutdown script... 20:54:37.712 killall jackd jackd: no process killed 20:54:37.926 Post-shutdown script terminated with exit status=256. 20:54:39.623 Could not connect to JACK server as client. Please check the messages window for more info. JACK tmpdir identified as [/dev/shm] 3) Next problem...I cannot access my Windows hard drive. There are two partitions on that drive and if I select either one, I get this message: "Unable to mount selected volume: I click on details and get this: libhal-storage.c 1401 : info: called libhal_free_dbus_error but dbuserror was not set. process 4607: applications must not close shared connections - see dbus_connection_close() docs. this is a bug in the application. error: device /dev/hda1 is not removable error: could not execute pmount I found all these problems in less than a half hour within 64Studio. Thusfar I am a bit disappointed that for being a more refined OS over Ubuntu Studio that I found all these problems already. Supposedly the Sound Blaster Live should be recognized by the system and I can get it to play sound within 64Studio, but Jack doesn't seem to see it because it's Ins/Outs do not appear on Jack's connection list. So I am gathering that this is causing the error message and why Jack shuts down. But the question is why is it happening in the first place. Anyway, if someone could give me assistance in solving these issues, I would appreciate it very much. Thank You, Geo

Rare problems

  • Quentin Harley
  • 05/24/07
  • Mon, 07/28/2008 - 18:49
Possibly installation related. I don't have any of these issues in my system... As I said - come back end 2008. (or I'll drop you a priv. message when it is released) Cheers, Q

Leaving 64Studio

  • jukingeo
  • 07/02/08
  • Mon, 07/28/2008 - 16:56
Hello all, I know that I left a few open issues here and I know that most of you have been trying to help with my sitution, it is just that in my approximate 2 to 3 hours that I had 64Studio on my system...I been noticing many situtations arise that either are a genuine problem with the operating system, limitations with my computer system and most of all my own limitations. AS it is I only been on Linux for about 2 months now and I thought 64Studio would be a great switch off from Ubuntu Studio. I wrote a post here on my thoughts on Ubuntu Studio and what I was considering to switch to, so I will not go into details here. I am also not going to mention the initial problems I been having with the version of Grub that comes with 64Studio. The details are listed under the Grub: cannot find operating system post. But yesterday I started to find more and more issues. For example, I couldn't even move and copy files. Unlike Ubuntu, where I could open up multiple instances of nautilus, I can't do it here, and I got stuck trying to perform a simple move of a file from one directory to another. At any rate I posted more details under the "Grub: cannot find operating system post", as there were other problems I found as well. As I said there, I am seriously beginning to doubt 64Studio is for me and I am considering other options, even going back to Ubuntu Studio. I don't think I am ready for 64Studio at this time, mainly because of my experience (or lack of such) with Linux for I only been here for two months. I just wanted to drop a line here to let everyone know that I appreciated all your help in trying to get me up and running and not just 'leave'. Again, I am not 100% sure where I am going to go now, but more then likely I probably will be leaving 64Studio. Once again, thank you for your time and help. Geo

Thank you all for

  • jukingeo
  • 07/02/08
  • Sun, 07/27/2008 - 20:13
Thank you all for responding, As of now I am testing 64Studio by itself because of the Grub problem I been having (I disconnected the Windows drive physically). However I noticed now even with one hard drive, I still have trouble mounting certain partitions. I get this error message: Cannot Mount Drive: libhal-storage.c 1401 : info: called libhal_free_dbus_error but dbuserror was not set. process 7507: applications must not close shared connections - see dbus_connection_close() docs. this is a bug in the application. error: device /dev/sda6 is not removable error: could not execute pmount I have this on two partitions...the Linux partitions I use for file storage actually. When I had the Windows drive connected, I couldn't mount it's partitions. But I could mount all the partitions on the Linux drive. So I am wondering why this is happening as it seems the problem is 'random'. Any assistance would be much appreciated. Thank You, Geo

I had the same problem with

  • soccerfiend
  • 05/07/08
  • Sun, 07/27/2008 - 20:09
I had the same problem with one of my Ubuntu installs, so it is probably not a 64studio specific problem.

Sound info

  • skullnotions
  • 09/29/07
  • Sat, 07/26/2008 - 12:22
post back what is returned when you type these in a terminal: $ lspci | grep -i audio $ cat /proc/asound/modules $ cat /proc/asound/devices $ lsmod | grep snd # fdisk -l Also take a look at dmesg, this will tell you a great deal about your system $ dmesg Cheers! dave

Hello Dave, here is all the

  • jukingeo
  • 07/02/08
  • Sun, 07/27/2008 - 20:09
Hello Dave, here is all the info you asked for...it is a BIGGIE (scroll down I have comments on the bottom). geo@64studio:~$ lspci | grep -i audio 02:02.0 Multimedia audio controller: Creative Labs [SB Live! Value] EMU10k1X geo@64studio:~$ cat /proc/asound/modules 0 snd_emu10k1x geo@64studio:~$ cat /proc/asound/devices 0: [ 0] : control 1: : sequencer 8: [ 0- 0]: raw midi 16: [ 0- 0]: digital audio playback 17: [ 0- 1]: digital audio playback 18: [ 0- 2]: digital audio playback 24: [ 0- 0]: digital audio capture 33: : timer geo@64studio:~$ lsmod | grep snd snd_emu10k1_synth 7936 0 snd_emux_synth 32896 1 snd_emu10k1_synth snd_seq_virmidi 8320 1 snd_emux_synth snd_seq_midi_emul 7040 1 snd_emux_synth snd_emu10k1 131520 1 snd_emu10k1_synth firmware_class 10880 1 snd_emu10k1 snd_util_mem 5632 2 snd_emux_synth,snd_emu10k1 snd_hwdep 10116 2 snd_emux_synth,snd_emu10k1 snd_emu10k1x 19492 3 snd_seq_dummy 4996 0 snd_seq_oss 32768 0 snd_seq_midi 9248 0 snd_seq_midi_event 8192 3 snd_seq_virmidi,snd_seq_oss,snd_seq_midi snd_seq 48848 12 snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event snd_rawmidi 23712 4 snd_seq_virmidi,snd_emu10k1,snd_emu10k1x,snd_seq_midi snd_seq_device 8972 8 snd_emu10k1_synth,snd_emux_synth,snd_emu10k1,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq,snd_rawmidi snd_ac97_codec 95268 2 snd_emu10k1,snd_emu10k1x snd_pcm_oss 40096 0 snd_mixer_oss 17280 1 snd_pcm_oss snd_pcm 71428 5 snd_emu10k1,snd_emu10k1x,snd_ac97_codec,snd_pcm_oss snd_timer 22660 4 snd_emu10k1,snd_seq,snd_pcm snd 54436 20 snd_emux_synth,snd_seq_virmidi,snd_emu10k1,snd_hwdep,snd_emu10k1x,snd_seq_dummy,snd_seq_oss,snd_seq,snd_rawmidi,snd_seq_device,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer soundcore 9056 1 snd ac97_bus 3712 1 snd_ac97_codec snd_page_alloc 11272 3 snd_emu10k1,snd_emu10k1x,snd_pcm geo@64studio:~$ sudo fdisk -l Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 * 1 851 6835626 83 Linux /dev/sda2 852 60801 481548375 5 Extended /dev/sda5 852 1181 2650693+ 82 Linux swap / Solaris /dev/sda6 13340 31575 146480638+ 83 Linux /dev/sda7 31576 46164 117186111 83 Linux /dev/sda8 46165 60801 117571671 b W95 FAT32 /dev/sda9 1182 13339 97659103+ 83 Linux Partition table entries are not in disk order geo@64studio:~$ $ dmesg bash: $: command not found geo@64studio:~$ dmesg Linux version 2.6.21-1-multimedia-486 (Debian 2.6.21-2) (waldi@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP PREEMPT RT Fri Jun 22 19:13:23 UTC 2007 BIOS-provided physical RAM map: sanitize start sanitize end copy_e820_map() start: 0000000000000000 size: 00000000000a0000 end: 00000000000a0000 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2 copy_e820_map() start: 0000000000100000 size: 000000005fe70000 end: 000000005ff70000 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000005ff70000 size: 0000000000002000 end: 000000005ff72000 type: 4 copy_e820_map() start: 000000005ff72000 size: 0000000000021000 end: 000000005ff93000 type: 3 copy_e820_map() start: 000000005ff93000 size: 000000000006d000 end: 0000000060000000 type: 2 copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2 copy_e820_map() start: 00000000fecf0000 size: 0000000000001000 end: 00000000fecf1000 type: 2 copy_e820_map() start: 00000000fed20000 size: 0000000000070000 end: 00000000fed90000 type: 2 copy_e820_map() start: 00000000fee00000 size: 0000000000010000 end: 00000000fee10000 type: 2 copy_e820_map() start: 00000000ffb00000 size: 0000000000500000 end: 0000000100000000 type: 2 BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000005ff70000 (usable) BIOS-e820: 000000005ff70000 - 000000005ff72000 (ACPI NVS) BIOS-e820: 000000005ff72000 - 000000005ff93000 (ACPI data) BIOS-e820: 000000005ff93000 - 0000000060000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fecf0000 - 00000000fecf1000 (reserved) BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) 639MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000fe710 Entering add_active_range(0, 0, 393072) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 393072 early_node_map[1] active PFN ranges 0: 0 -> 393072 On node 0 totalpages: 393072 DMA zone: 56 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4040 pages, LIFO batch:0 Normal zone: 3080 pages used for memmap Normal zone: 222200 pages, LIFO batch:31 HighMem zone: 2238 pages used for memmap HighMem zone: 161458 pages, LIFO batch:31 DMI 2.3 present. ACPI: RSDP 000FEBA0, 0014 (r0 DELL ) ACPI: RSDT 000FD1B3, 0034 (r1 DELL 4600 7 ASL 61) ACPI: FACP 000FD1E7, 0074 (r1 DELL 4600 7 ASL 61) ACPI: DSDT FFFCF6B5, 24C9 (r1 DELL dt_ex 1000 MSFT 100000D) ACPI: FACS 5FF70000, 0040 ACPI: SSDT FFFD1B7E, 00A7 (r1 DELL st_ex 1000 MSFT 100000D) ACPI: APIC 000FD25B, 006C (r1 DELL 4600 7 ASL 61) ACPI: BOOT 000FD2C7, 0028 (r1 DELL 4600 7 ASL 61) ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:2 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 70000000 (gap: 60000000:9ec00000) Real-Time Preemption Support (C) 2004-2007 Ingo Molnar Built 1 zonelists. Total pages: 387698 Kernel command line: root=/dev/sda1 ro vga=791 splash=silent bootsplash: silent mode. mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 WARNING: experimental RCU implementation. PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 2793.186 MHz processor. Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1540140k/1572288k available (1720k kernel code, 30928k reserved, 680k data, 308k init, 654784k highmem) virtual kernel memory layout: fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc035f000 - 0xc03ac000 ( 308 kB) .data : 0xc02ae041 - 0xc03580d4 ( 680 kB) .text : 0xc0100000 - 0xc02ae041 (1720 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 5588.31 BogoMIPS (lpj=2794158) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Hyper-Threading is disabled CPU: After all inits, caps: bfebfbff 00000000 00000000 00003080 00004400 00000000 00000000 Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 9k freed ACPI: Core revision 20070126 CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09 Total of 1 processors activated (5588.31 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 Brought up 1 CPUs NET: Registered protocol family 16 EISA bus registered ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfbb11, last bus=2 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) HPET at base address 0xfed00000 PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO PCI quirk: region 0880-08bf claimed by ICH4 GPIO Boot video device is 0000:01:00.0 PCI: Firmware left 0000:02:08.0 e100 interrupts enabled, disabling PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15) ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 12 devices PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NET: Registered protocol family 8 NET: Registered protocol family 20 hpet clockevent registered hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved pnp: 00:00: iomem range 0x100000-0xffffff could not be reserved pnp: 00:00: iomem range 0x1000000-0x5ff6ffff could not be reserved pnp: 00:00: iomem range 0xc0000-0xfffff could not be reserved pnp: 00:0b: ioport range 0x800-0x85f has been reserved pnp: 00:0b: ioport range 0xc00-0xc7f has been reserved pnp: 00:0b: ioport range 0x860-0x8ff could not be reserved PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: fd000000-feafffff PREFETCH window: f0000000-f7ffffff PCI: Bridge: 0000:00:1e.0 IO window: d000-dfff MEM window: fcf00000-fcffffff PREFETCH window: disabled. PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 65536 (order: 9, 2883584 bytes) TCP bind hash table entries: 65536 (order: 9, 2359296 bytes) TCP: Hash tables configured (established 65536 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 4981k freed Simple Boot Flag value 0x87 read from CMOS RAM was invalid Simple Boot Flag at 0x7a set to 0x1 audit: initializing netlink socket (disabled) audit(1217168026.301:1): initialized highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) vesafb: framebuffer at 0xf0000000, mapped to 0xf8880000, using 6144k, total 131072k vesafb: mode is 1024x768x16, linelength=2048, pages=1 vesafb: protected mode interface info at c000:f080 vesafb: pmi: set display start = c00cf0b6, set palette = c00cf120 vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 82817 bytes,<6>...found (1024x768, 67122 bytes, v3). Console: switching to colour frame buffer device 128x48 Switched to NOHz mode on CPU #0 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice EISA: Probing bus 0 at eisa.0 EISA: Detected 0 cards. TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI Shortcut mode Freeing unused kernel memory: 308k freed input: AT Translated Set 2 keyboard as /class/input/input0 vga16fb: initializing vga16fb: mapped to 0xc00a0000 fb1: VGA16 VGA frame buffer device usbcore: registered new interface driver usbfs SCSI subsystem initialized libata version 2.20 loaded. ieee1394: Initialized config rom entry `ip1394' e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI e100: Copyright(c) 1999-2006 Intel Corporation ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 20 (level, low) -> IRQ 16 e100: eth0: e100_probe: addr 0xfcffb000, irq 16, MAC addr 00:0C:F1:E0:40:CA ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 21 (level, low) -> IRQ 17 usbcore: registered new interface driver hub usbcore: registered new device driver usb USB Universal Host Controller Interface driver v3.0 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[fcffa800-fcffafff] Max Packet=[2048] IR/IT contexts=[4/8] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 18, io mem 0xffa80800 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000ff80 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ata_piix 0000:00:1f.2: version 2.10ac1 ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0x0001fe00 ctl 0x0001fe12 bmdma 0x0001fea0 irq 20 ata2: SATA max UDMA/133 cmd 0x0001fe20 ctl 0x0001fe32 bmdma 0x0001fea8 irq 20 scsi0 : ata_piix ata1.00: ATA-7: ST3500630AS, 3.AAK, max UDMA/133 ata1.00: 976773168 sectors, multi 8: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/133 scsi1 : ata_piix scsi 0:0:0:0: Direct-Access ATA ST3500630AS 3.AA PQ: 0 ANSI: 5 ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000ff60 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ICH5: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 20 ICH5: chipset revision 2 ICH5: not 100% native mode: will probe irqs later ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide1... hdc: SAMSUNG DVD-ROM SD-616E, ATAPI CD/DVD-ROM drive ieee1394: Error parsing configrom for node 0-00:1023 ieee1394: Host added: ID:BUS[0-01:1023] GUID[00d00356000008f0] hdd: SONY DVD RW DRU-840A, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000ff40 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB) hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 hdd: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 19, io base 0x0000ff20 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 > sd 0:0:0:0: Attached scsi disk sda kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Real Time Clock Driver v1.12ac input: PC Speaker as /class/input/input1 Floppy drive(s): fd0 is 1.44M eth1394: eth0: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0) FDC 0 is a post-1991 82077 Linux agpgart interface v0.102 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 10 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 logips2pp: Detected unknown logitech mouse model 74 ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 22 agpgart: Detected an Intel 865 Chipset. iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP] agpgart: AGP aperture is 128M @ 0xe8000000 gameport: EMU10K1 is pci0000:02:02.1/gameport0, io 0xdf18, speed 1125kHz input: PS/2 Logitech Mouse as /class/input/input2 iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0860) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 17 (level, low) -> IRQ 22 intel_rng: Firmware space is locked read-only. If you can't or intel_rng: don't want to disable this in firmware setup, and if intel_rng: you are certain that your system has a functional intel_rng: RNG, try using the 'no_fwh_detect' option. ALSA /usr/src/modules/alsa-driver/pci/emu10k1/emu10k1x.c:949: Model 1003 Rev 00000000 Serial 10031102 Adding 2650684k swap on /dev/sda5. Priority:-1 extents:1 across:2650684k EXT3 FS on sda1, internal journal device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.comkjournald starting. Commit interval 5 seconds EXT3 FS on sda9, internal journal EXT3-fs: mounted filesystem with ordered data mode. e100: eth1: e100_watchdog: link up, 100Mbps, full-duplex bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (1024x768, 67122 bytes, v3). bootsplash: status on console 1 changed to on bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (1024x768, 67122 bytes, v3). bootsplash: status on console 2 changed to on bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (1024x768, 67122 bytes, v3). bootsplash: status on console 3 changed to on bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (1024x768, 67122 bytes, v3). bootsplash: status on console 4 changed to on bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (1024x768, 67122 bytes, v3). bootsplash: status on console 5 changed to on input: Power Button (FF) as /class/input/input3 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input4 ACPI: Power Button (CM) [VBTN] lp0: using parport0 (interrupt-driven). ppdev: user-space parallel port driver NET: Registered protocol family 10 lo: Disabled Privacy Extensions tsdev (compaq touchscreen emulation) is scheduled for removal. See Documentation/feature-removal-schedule.txt for details. Capability LSM initialized Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 eth1: no IPv6 routers present ADDRCONF(NETDEV_UP): eth1: link is not ready e100: eth1: e100_watchdog: link up, 100Mbps, full-duplex ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready ADDRCONF(NETDEV_UP): eth1: link is not ready e100: eth1: e100_watchdog: link up, 100Mbps, full-duplex ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready eth1: no IPv6 routers present geo@64studio:~$ Ok, there are two things that I have to mention: 1) Right now I am testing 64Studio with only ONE hard drive. I been having bootloader problems with the 64Studio installation (Grub) and I cover that in another post. So while I am experimenting here, I only have the the one hard drive connected (simply put...I don't feel like reinstalling Windows AGAIN). So once I get my bootloader situation fixed there will be another drive there. 2) I will be changing/adding another sound device in the near future. I have an Echo Mona on the way. This will replace my non-Linux compliant Alesis IO_26 unit. But I don't have it as of yet (it is in the mail). Now in terms of sound would you want some additional info in Jack? Audio does seem to work within 64Studio...including streaming audio/video sources such as YouTube. The funny thing is that with nothing hooked up to Jack and you click on connections, you CAN see everything for MIDI, but not Audio. So if I open up Virtual Keyboard and then QSynth, QSynth will produce an error saying "couldn't start audio device". I would guess the audio in/outs should be present in Jack. At least I know they were when I was using Ubuntu Studio. Let me know if you see anything "weird". Thanx, Geo

Solution for problem 1: Iceweasel language selection

  • Takabuntu
  • 08/20/07
  • Sat, 07/26/2008 - 12:17
When you are typing text, right click in the box you are currently typing text into to get a context menu and select in the languages menu the correct language. If you are missing languages you can install those as "iceweasel language" packages with the synaptic.

Thanx for the info, that

  • jukingeo
  • 07/02/08
  • Sun, 07/27/2008 - 19:54
Thanx for the info, that worked fine. I found that weird though, that 64S didn't have an "English" listing for the spell checker and it has to be installed. Was 64S originally a European based distro? Geo