Sound Problem - Soundblaster Live

I'm running the following: Virtualbox on XP Pro SP2 Creative Soundblaster Live Card Echo Mona Sound Card After installing 64 Studio on Virtualbox, sound doesn't work although works fine in XP. I'm noob level and have been going through google searches the last couple of days but have not been able to resolve. Here is some initial information through some commands I have picked up...hopeing that someone might help me decipher. (seperate issue) Also, I know for a fact that I picked English during setup but I keep getting red lines under everything I type. 64studio:/home/user# sudo modprobe snd-emu10k1 64studio:/home/user# lspci | grep -i audio 64studio:/home/user# cat /proc/asound/modules 64studio:/home/user# cat /proc/asound/devices 1: : sequencer 33: : timer 64studio:/home/user# lsmod | grep snd snd_emu10k1_synth 7936 0 snd_emux_synth 32256 1 snd_emu10k1_synth snd_seq_virmidi 8320 1 snd_emux_synth snd_seq_midi_emul 7040 1 snd_emux_synth snd_emu10k1 123968 1 snd_emu10k1_synth snd_seq_dummy 4868 0 snd_seq_oss 30976 0 snd_seq_midi 9248 0 snd_seq_midi_event 8192 3 snd_seq_virmidi,snd_seq_oss,snd_seq_midi snd_seq 48208 9 snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event snd_rawmidi 23584 3 snd_seq_virmidi,snd_emu10k1,snd_seq_midi firmware_class 10880 1 snd_emu10k1 snd_ac97_codec 93732 1 snd_emu10k1 ac97_bus 3712 1 snd_ac97_codec snd_pcm_oss 40480 0 snd_mixer_oss 16640 1 snd_pcm_oss snd_pcm 73220 3 snd_emu10k1,snd_ac97_codec,snd_pcm_oss snd_seq_device 8716 8 snd_emu10k1_synth,snd_emux_synth,snd_emu10k1,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq,snd_rawmidi snd_timer 22148 3 snd_emu10k1,snd_seq,snd_pcm snd_page_alloc 10760 2 snd_emu10k1,snd_pcm snd_util_mem 5632 2 snd_emux_synth,snd_emu10k1 snd_hwdep 9860 2 snd_emux_synth,snd_emu10k1 snd 50020 13 snd_emux_synth,snd_seq_virmidi,snd_emu10k1,snd_seq_oss,snd_seq,snd_rawmidi,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_device,snd_timer,snd_hwdep soundcore 9056 1 snd 64studio:/home/user# fdisk -l Disk /dev/hda: 8589 MB, 8589934592 bytes 255 heads, 63 sectors/track, 1044 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hda1 * 1 993 7976241 83 Linux /dev/hda2 994 1044 409657+ 5 Extended /dev/hda5 994 1044 409626 82 Linux swap / Solaris 64studio:/home/user# dmesg Linux version 2.6.21-1-multimedia-486 (Debian 2.6.21-2) (waldi@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP PREEMPT RT Fri Jun 22 19:13:23 UTC 2007 BIOS-provided physical RAM map: sanitize start sanitize end copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2 copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2 copy_e820_map() start: 0000000000100000 size: 000000000fef0000 end: 000000000fff0000 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000000fff0000 size: 0000000000010000 end: 0000000010000000 type: 3 copy_e820_map() start: 00000000fffc0000 size: 0000000000040000 end: 0000000100000000 type: 2 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000fff0000 (usable) BIOS-e820: 000000000fff0000 - 0000000010000000 (ACPI data) BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 255MB LOWMEM available. Entering add_active_range(0, 0, 65520) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 65520 HighMem 65520 -> 65520 early_node_map[1] active PFN ranges 0: 0 -> 65520 On node 0 totalpages: 65520 DMA zone: 56 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4040 pages, LIFO batch:0 Normal zone: 839 pages used for memmap Normal zone: 60585 pages, LIFO batch:15 HighMem zone: 0 pages used for memmap DMI 2.5 present. ACPI: RSDP 000E0000, 0024 (r2 VBOX ) ACPI: XSDT 0FFF0030, 002C (r1 VBOX VBOXXSDT 1 ASL 61) ACPI: FACP 0FFF0060, 00F4 (r4 VBOX VBOXFACP 1 ASL 61) ACPI: DSDT 0FFF01A0, 1064 (r1 VBOX VBOXBIOS 2 INTL 20050309) ACPI: FACS 0FFF0160, 0040 ACPI: PM-Timer IO Port: 0x4008 Allocating PCI resources starting at 20000000 (gap: 10000000:effc0000) Real-Time Preemption Support (C) 2004-2007 Ingo Molnar Built 1 zonelists. Total pages: 64625 Kernel command line: root=/dev/hda1 ro vga=791 splash=silent bootsplash: silent mode. Found and enabled local APIC! mapped APIC to ffffd000 (fee00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 WARNING: experimental RCU implementation. PID hash table entries: 1024 (order: 10, 4096 bytes) Detected 2327.795 MHz processor. Console: colour dummy device 80x25 Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 249240k/262080k available (1720k kernel code, 12340k reserved, 680k data, 308k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xd0800000 - 0xff7fe000 ( 751 MB) lowmem : 0xc0000000 - 0xcfff0000 ( 255 MB) .init : 0xc035f000 - 0xc03ac000 ( 308 kB) .data : 0xc02ae041 - 0xc03580d4 ( 680 kB) .text : 0xc0100000 - 0xc02ae041 (1720 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 4685.95 BogoMIPS (lpj=2342979) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0788a3bf 00000000 00000000 00000000 00000008 00000000 00000000 monitor/mwait feature present. using mwait in idle threads. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L3 cache: 4096K CPU: After all inits, caps: 0788a3bf 00000000 00000000 00000140 00000008 00000000 00000000 Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 9k freed ACPI: Core revision 20070126 ACPI: setting ELCR to 0200 (from 0c00) CPU0: Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz stepping 0b SMP motherboard not detected. Brought up 1 CPUs NET: Registered protocol family 16 EISA bus registered ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfada0, last bus=0 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:00:02.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 5 9 *10 11) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 6 devices PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NET: Registered protocol family 8 NET: Registered protocol family 20 PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 NET: Registered protocol family 2 IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 6, 360448 bytes) TCP bind hash table entries: 8192 (order: 6, 294912 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 4979k freed audit: initializing netlink socket (disabled) audit(1217857531.197:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Limiting direct PCI/PCI transfers. Activating ISA DMA hang workarounds. vesafb: framebuffer at 0xe0000000, mapped to 0xd0880000, using 6144k, total 8192k vesafb: mode is 1024x768x16, linelength=2048, pages=4 vesafb: protected mode interface info at c000:7d3e vesafb: pmi: set display start = c00c7d89, set palette = c00c7e3a vesafb: pmi: ports = 1ce 1cf 1cf 1d0 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 82817 bytes,<6>...found (1024x768, 67122 bytes, v3). Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... Switched to NOHz mode on CPU #0 isapnp: No Plug & Play device found RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input0 EISA: Probing bus 0 at eisa.0 Cannot allocate resource for EISA slot 4 EISA: Detected 0 cards. TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI Shortcut mode Freeing unused kernel memory: 308k freed vga16fb: initializing vga16fb: mapped to 0xc00a0000 fb1: VGA16 VGA frame buffer device SCSI subsystem initialized libata version 2.20 loaded. pcnet32.c:v1.33-NAPI 27.Jun.2006 tsbogend@alpha.franken.de Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller at PCI slot 0000:00:01.1 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xc000-0xc007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xc008-0xc00f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: VBOX HARDDISK, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: VBOX CD-ROM, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:03.0 to 64 pcnet32: PCnet/FAST III 79C973 at 0xc020, 08 00 27 f8 6a 84 assigned IRQ 11. pcnet32: Found PHY 0022:561b at address 0. eth0: registered as PCnet/FAST III 79C973 pcnet32: 1 cards_found. hdc: ATAPI 32X DVD-ROM drive, 128kB Cache, UDMA(33) hda: max request size: 128KiB Uniform CD-ROM driver Revision: 3.20 hda: 16777216 sectors (8589 MB) w/256KiB Cache, CHS=16644/16/63, UDMA(33) hda: cache flushes supported hda: hda1 hda2 < hda5 > kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. input: PC Speaker as /class/input/input1 Floppy drive(s): fd0 is 1.44M FDC 0 is a S82078B input: ImExPS/2 Generic Explorer Mouse as /class/input/input2 parport: PnPBIOS parport detected. Adding 409616k swap on /dev/hda5. Priority:-1 extents:1 across:409616k EXT3 FS on hda1, internal journal device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com eth0: link up, 100Mbps, full-duplex bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (1024x768, 67122 bytes, v3). bootsplash: status on console 1 changed to on bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (1024x768, 67122 bytes, v3). bootsplash: status on console 2 changed to on bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (1024x768, 67122 bytes, v3). bootsplash: status on console 3 changed to on bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (1024x768, 67122 bytes, v3). bootsplash: status on console 4 changed to on bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (1024x768, 67122 bytes, v3). bootsplash: status on console 5 changed to on NET: Registered protocol family 10 lo: Disabled Privacy Extensions ACPI: AC Adapter [AC] (on-line) input: Power Button (FF) as /class/input/input3 ACPI: Power Button (FF) [PWRF] input: Sleep Button (FF) as /class/input/input4 ACPI: Sleep Button (FF) [SLPF] lp: driver loaded but no devices found ppdev: user-space parallel port driver tsdev (compaq touchscreen emulation) is scheduled for removal. See Documentation/feature-removal-schedule.txt for details. Capability LSM initialized Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 eth0: no IPv6 routers present