all of a sudden "could not connect to jack server"

  • sonictwin
Posted: Mon, 08/11/2008 - 04:23
Hi all! Running 64Studio 2.1. Jack wont start all of a sudden. The only thing I can think is different is that I installed VirtualBox. I've tried removing the vbox module and starting jack that way,but same error... heres some system output... lspci 04:00.0 Ethernet controller: Marvell Technology Group Ltd. Unknown device 4364 (rev 12) jack messages can't create mcop directory Creating link /home/ryan/.kde/socket-64studio. 00:09:49.666 Startup script terminated with exit status=256. 00:09:49.666 JACK is starting... 00:09:49.666 /usr/bin/jackd -v -R -dalsa -dhw:0 -r44100 -p1024 -n3 -m 00:09:49.668 JACK was started with PID=3999 (0xf9f). /usr/bin/jackd: symbol lookup error: /usr/bin/jackd: undefined symbol: jack_tmpdir 00:09:49.673 JACK was stopped with exit status=127. 00:09:49.673 Post-shutdown script... 00:09:49.674 killall jackd jackd: no process killed 00:09:49.887 Post-shutdown script terminated with exit status=256. 00:09:51.707 Could not connect to JACK server as client. Please check the messages window for more info. Cannot connect to server socket (No such file or directory) Cannot connect to server socket Cannot connect to the server dmesg On node 0 totalpages: 1048191 DMA zone: 96 pages used for memmap DMA zone: 1042 pages reserved DMA zone: 2861 pages, LIFO batch:0 DMA32 zone: 24480 pages used for memmap DMA32 zone: 888640 pages, LIFO batch:31 Normal zone: 3072 pages used for memmap Normal zone: 128000 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Nosave address range: 000000000009f000 - 00000000000a0000 Nosave address range: 00000000000a0000 - 00000000000f0000 Nosave address range: 00000000000f0000 - 0000000000100000 Nosave address range: 00000000dfee0000 - 00000000dfee3000 Nosave address range: 00000000dfee3000 - 00000000dfef0000 Nosave address range: 00000000dfef0000 - 00000000dff00000 Nosave address range: 00000000dff00000 - 00000000f0000000 Nosave address range: 00000000f0000000 - 00000000f4000000 Nosave address range: 00000000f4000000 - 00000000fec00000 Nosave address range: 00000000fec00000 - 0000000100000000 Allocating PCI resources starting at e0000000 (gap: dff00000:10100000) SMP: Allowing 4 CPUs, 2 hotplug CPUs PERCPU: Allocating 36736 bytes of per cpu data Real-Time Preemption Support (C) 2004-2007 Ingo Molnar Built 1 zonelists. Total pages: 1019501 Kernel command line: root=/dev/sda1 ro vga=791 splash=nosplash Initializing CPU#0 WARNING: experimental RCU implementation. PID hash table entries: 4096 (order: 12, 32768 bytes) hpet clockevent registered TSC calibrated against HPET time.c: Detected 2009.998 MHz processor. Console: colour dummy device 80x25 Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Checking aperture... Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing software IO TLB between 0x1682000 - 0x5682000 Memory: 3999896k/4718592k available (2038k kernel code, 192868k reserved, 945k data, 300k init) Calibrating delay using timer specific routine.. 4022.60 BogoMIPS (lpj=2011300) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU 0/0 -> Node 0 using mwait in idle threads. CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM2) SMP alternatives: switching to UP code ACPI: Core revision 20070126 Using local APIC timer interrupts. SMP alternatives: switching to SMP code Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 4019.93 BogoMIPS (lpj=2009967) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU 1/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) Intel(R) Core(TM)2 CPU 4400 @ 2.00GHz stepping 02 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG at f0000000 - f3ffffff mtrr: your CPUs had inconsistent variable MTRR settings mtrr: probably your BIOS does not setup all CPUs. mtrr: corrected configuration. ACPI: Interpreter enabled ACPI: (supports S0 S1 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO PCI quirk: region 0480-04bf claimed by ICH6 GPIO Boot video device is 0000:01:00.0 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 *12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: ACPI device : hid PNP0A03 pnp: ACPI device : hid PNP0C02 pnp: ACPI device : hid PNP0200 pnp: ACPI device : hid PNP0B00 pnp: ACPI device : hid PNP0800 pnp: ACPI device : hid PNP0C04 pnp: ACPI device : hid PNP0700 pnp: ACPI device : hid PNP0501 pnp: ACPI device : hid PNP0400 pnp: ACPI device : hid PNP0303 pnp: ACPI device : hid PNP0C02 pnp: ACPI device : hid PNP0C02 pnp: ACPI device : hid PNP0C01 pnp: ACPI device : hid INT0800 pnp: PnP ACPI: found 14 devices usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NET: Registered protocol family 8 NET: Registered protocol family 20 PCI-GART: No AMD northbridge found. pnp: the driver 'system' has been registered pnp: match found with the PnP device '00:01' and the driver 'system' pnp: match found with the PnP device '00:0a' and the driver 'system' pnp: 00:0a: ioport range 0x400-0x4bf could not be reserved pnp: match found with the PnP device '00:0b' and the driver 'system' pnp: 00:0b: iomem range 0xf0000000-0xf3ffffff could not be reserved pnp: match found with the PnP device '00:0c' and the driver 'system' pnp: 00:0c: iomem range 0xcec00-0xcffff has been reserved pnp: 00:0c: iomem range 0xf0000-0xf7fff could not be reserved pnp: 00:0c: iomem range 0xf8000-0xfbfff could not be reserved pnp: 00:0c: iomem range 0xfc000-0xfffff could not be reserved PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: f4000000-f6ffffff PREFETCH window: e0000000-efffffff PCI: Bridge: 0000:00:1c.0 IO window: 7000-7fff MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.3 IO window: 8000-9fff MEM window: f9000000-f90fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.4 IO window: a000-afff MEM window: f7000000-f8ffffff PREFETCH window: f9300000-f93fffff PCI: Bridge: 0000:00:1e.0 IO window: b000-bfff MEM window: f9100000-f91fffff PREFETCH window: disabled. ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1c.3 to 64 ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.4 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 32768 (order: 9, 2359296 bytes) TCP bind hash table entries: 32768 (order: 9, 2097152 bytes) TCP: Hash tables configured (established 32768 bind 32768) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 5472k freed audit: initializing netlink socket (disabled) audit(1218427281.046:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] Allocate Port Service[0000:00:01.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] Allocate Port Service[0000:00:1c.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.3 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.3:pcie00] Allocate Port Service[0000:00:1c.3:pcie02] Allocate Port Service[0000:00:1c.3:pcie03] PCI: Setting latency timer of device 0000:00:1c.4 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.4:pcie00] Allocate Port Service[0000:00:1c.4:pcie02] Allocate Port Service[0000:00:1c.4:pcie03] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc20004100000, using 6144k, total 131072k vesafb: mode is 1024x768x16, linelength=2048, pages=1 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 82817 bytes,<6>...found (1024x768, 67122 bytes, v3). Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device Real Time Clock Driver v1.12ac Linux agpgart interface v0.102 (c) Dave Jones RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize pnp: the driver 'i8042 kbd' has been registered pnp: match found with the PnP device '00:09' and the driver 'i8042 kbd' pnp: the driver 'i8042 aux' has been registered PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 controller doesn't have AUX irq; using default 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Freeing unused kernel memory: 300k freed input: AT Translated Set 2 keyboard as /class/input/input0 vga16fb: initializing vga16fb: mapped to 0xffff8100000a0000 fb1: VGA16 VGA frame buffer device ACPI: Processor [CPU0] (supports 2 throttling states) ACPI: Processor [CPU1] (supports 2 throttling states) ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126] USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1a.7 to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 PCI: cache line size of 32 is not supported by device 0000:00:1a.7 ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9201000 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx pnp: the driver 'ide' has been registered SCSI subsystem initialized libata version 2.20 loaded. ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9200000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected ieee1394: Initialized config rom entry `ip1394' JMB363: IDE controller at PCI slot 0000:03:00.1 PCI: Enabling device 0000:03:00.1 (0000 -> 0001) ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 16 (level, low) -> IRQ 16 JMB363: chipset revision 2 JMB363: 100% native mode on irq 16 PCI: Setting latency timer of device 0000:03:00.1 to 64 ide0: BM-DMA at 0x9000-0x9007, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0x9008-0x900f, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... usb 1-1: new high speed USB device using ehci_hcd and address 2 usb 1-1: configuration #1 chosen from 1 choice Probing IDE interface ide1... ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1a.0 to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller Initializing USB Mass Storage driver... scsi0 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning usbcore: registered new interface driver usb-storage USB Mass Storage support registered. uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000d000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1a.1 to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c000 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ahci 0000:03:00.0: version 2.1 ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 19 (level, low) -> IRQ 19 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c400 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c800 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected usb 3-2: new low speed USB device using uhci_hcd and address 2 ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000cc00 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected usb 3-2: configuration #1 chosen from 1 choice usb 7-1: new full speed USB device using uhci_hcd and address 2 usb 7-1: configuration #1 chosen from 1 choice PCI: Setting latency timer of device 0000:03:00.0 to 64 ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part ata1: SATA max UDMA/133 cmd 0xffffc20000030100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19 ata2: SATA max UDMA/133 cmd 0xffffc20000030180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19 scsi1 : ahci ata1: SATA link down (SStatus 0 SControl 300) scsi2 : ahci ata2: SATA link down (SStatus 0 SControl 300) ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 19 (level, low) -> IRQ 19 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[f9100000-f91007ff] Max Packet=[2048] IR/IT contexts=[4/8] ata_piix 0000:00:1f.2: version 2.10ac1 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 usbcore: registered new interface driver hiddev PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata3: SATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001f000 irq 14 input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /class/input/input1 input: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1a.0-2 input: Griffin Technology, Inc. RadioSHARK as /class/input/input2 input: USB HID v1.00 Device [Griffin Technology, Inc. RadioSHARK] on usb-0000:00:1d.2-1 usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver ata4: SATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001f008 irq 15 scsi3 : ata_piix ata3.00: ATA-7: WDC WD2500KS-00MJB0, 02.01C03, max UDMA/133 ata3.00: 488395055 sectors, multi 16: LBA48 ata3.00: configured for UDMA/133 scsi4 : ata_piix ATA: abnormal status 0x7F on port 0x0000000000010177 scsi 3:0:0:0: Direct-Access ATA WDC WD2500KS-00M 02.0 PQ: 0 ANSI: 5 ata_piix 0000:00:1f.5: MAP [ P0 P2 P1 P3 ] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1f.5 to 64 ata5: SATA max UDMA/133 cmd 0x000000000001d800 ctl 0x000000000001dc02 bmdma 0x000000000001e800 irq 19 ata6: SATA max UDMA/133 cmd 0x000000000001e000 ctl 0x000000000001e402 bmdma 0x000000000001e808 irq 19 scsi5 : ata_piix ATA: abnormal status 0x7F on port 0x000000000001d807 scsi6 : ata_piix ATA: abnormal status 0x7F on port 0x000000000001e007 SCSI device sda: 488395055 512-byte hdwr sectors (250058 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sda: 488395055 512-byte hdwr sectors (250058 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 < sda5 > sd 3:0:0:0: Attached scsi disk sda ieee1394: Node added: ID:BUS[0-00:1023] GUID[0090a991e000dd4a] Attempting manual resume kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. ieee1394: Error parsing configrom for node 0-01:1023 ieee1394: Host added: ID:BUS[0-02:1023] GUID[013940507120016d] usb-storage: device scan complete scsi 0:0:0:0: CD-ROM PLEXTOR DVDR PX-750A 1.01 PQ: 0 ANSI: 0 sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 0:0:0:0: Attached scsi CD-ROM sr0 sd 3:0:0:0: Attached scsi generic sg0 type 0 sr 0:0:0:0: Attached scsi generic sg1 type 5 scsi7 : SBP-2 IEEE-1394 eth1394: eth0: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0) ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:04:00.0 to 64 sky2 0000:04:00.0: v1.14 addr 0xf8000000 irq 16 Yukon-EC Ultra (0xb4) rev 3 input: PC Speaker as /class/input/input3 sky2 eth1: addr 00:1a:4d:84:5f:b1 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Serial: 8250/16550 driver $Revision: 1.90 $ 10 ports, IRQ sharing enabled iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x0460) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 18 gameport: EMU10K1 is pci0000:05:00.1/gameport0, io 0xb400, speed 925kHz pnp: the driver 'serial' has been registered pnp: match found with the PnP device '00:07' and the driver 'serial' 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A pnp: the driver 'parport_pc' has been registered pnp: match found with the PnP device '00:08' and the driver 'parport_pc' parport: PnPBIOS parport detected. parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 20 (level, low) -> IRQ 20 usbcore: registered new interface driver snd-usb-audio ieee1394: sbp2: Logged into SBP-2 device ieee1394: sbp2: Node 0-00:1023: Max speed [S400] - Max payload [2048] scsi 7:0:1:0: Direct-Access WD 2500JS External 100a PQ: 0 ANSI: 4 SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB) sdb: Write Protect is off sdb: Mode Sense: 11 00 00 00 sdb: cache data unavailable sdb: assuming drive cache: write through SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB) sdb: Write Protect is off sdb: Mode Sense: 11 00 00 00 sdb: cache data unavailable sdb: assuming drive cache: write through sdb: sdb1 sd 7:0:1:0: Attached scsi disk sdb sd 7:0:1:0: Attached scsi generic sg2 type 0 Adding 9936160k swap on /dev/sda5. Priority:-1 extents:1 across:9936160k EXT3 FS on sda1, internal journal device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.cominput: Power Button (FF) as /class/input/input4 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input5 ACPI: Power Button (CM) [PWRB] lp0: using parport0 (interrupt-driven). ppdev: user-space parallel port driver tsdev (compaq touchscreen emulation) is scheduled for removal. See Documentation/feature-removal-schedule.txt for details. sky2 eth1: enabling interface sky2 eth1: ram buffer 0K Capability LSM initialized NET: Registered protocol family 10 lo: Disabled Privacy Extensions ADDRCONF(NETDEV_UP): eth1: link is not ready vboxdrv: Trying to deactivate the NMI watchdog permanently... vboxdrv: Successfully done. vboxdrv: Found 2 processor cores. vboxdrv: fAsync=0 u64DiffCores=820. vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. vboxdrv: Successfully loaded version 1.6.4 (interface 0x00080000). Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 nvidia: module license 'NVIDIA' taints kernel. ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:01:00.0 to 64 NVRM: loading NVIDIA UNIX x86_64 Kernel Module 173.14.09 Wed Jun 4 23:40:50 PDT 2008 FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! running jackd at the command prompt as either root or user returns this: jackd: symbol lookup error: jackd: undefined symbol: jack_tmpdir that last one is key i think... im going to go google around... can anyone tell whats going on? thanks, ryan

Got it!

  • sonictwin
  • 07/18/08
  • Mon, 08/11/2008 - 11:53
It seems it was as simple as changing Periods/Buffer from 3 to 2. ::rolls eyes:: Of course this was after I removed VirtualBox, and my nvidia drivers :) Got them both reinstalled and jack still works! Thanks Quentin :)

Hardware clash

  • Quentin Harley
  • 05/24/07
  • Mon, 08/11/2008 - 07:44
I think the Virtual box software is hogging your audio hardware, and now jack cannot get to it. I don't know this platform, so I also do not know what it does to your system (and I am not intending to find out...) Easiest - find out what is holding onto the hardware and terminate it. Most effective - Backup your home folder files, and reinstall 64 Studio Cheers,

i should note that

  • sonictwin
  • 07/18/08
  • Mon, 08/11/2008 - 04:47
$ sudo jackd -R -d alsa outputs jackd 0.103.0 Copyright 2001-2005 Paul Davis and others. jackd comes with ABSOLUTELY NO WARRANTY This is free software, and you are welcome to redistribute it under certain conditions; see the file COPYING for details JACK compiled with System V SHM support. loading driver .. SSE2 detected creating alsa driver ... hw:0|hw:0|1024|2|48000|0|0|nomon|swmeter|-|32bit control device hw:0 configuring for 48000Hz, period = 1024 frames, buffer = 2 periods ALSA: final selected sample format for capture: 16bit little-endian ALSA: use 2 periods for capture ALSA: final selected sample format for playback: 16bit little-endian ALSA: use 2 periods for playback but it just hangs there...

lspci

  • sonictwin
  • 07/18/08
  • Mon, 08/11/2008 - 04:24
that should have read, 05:00.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 07) oops, sorry.