USB Sound card

Launch Jack Control from the Sound and Video Menu and click on the the setup button. On the right column you'll see an "interface" field. That must be your hw:2 device (see the devices by clicking on the arrow >). I suggest you read the jack tutorial and search the forums, even if it seem to work out of the box, for a correct setup and use of JACK. There is no space in cat /proc/asound/modules, sorry, my typo. Anyway, as Quentin said, it's been plug and play. Next step is Jack. Cheers. Pablo

Thank you. I plugged it and found it on the list. Where can I use in Jack the right interface. Below I show you what I gor in terminal. rudolf@64studio:~$ lsusb Bus 006 Device 001: ID 0000:0000 Bus 005 Device 002: ID 0ccd:0028 TerraTec Electronic GmbH Bus 005 Device 001: ID 0000:0000 Bus 004 Device 001: ID 0000:0000 Bus 002 Device 002: ID 04d9:1133 Holtek Semiconductor, Inc. Bus 002 Device 001: ID 0000:0000 Bus 003 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000 rudolf@64studio:~$ cat /proc/asound/cards 0 [V8235 ]: VIA8233 - VIA 8235 VIA 8235 with Cx20468 at 0xe000, irq 5 1 [modem ]: VIA82XX-MODEM - VIA 82XX modem VIA 82XX modem at 0xe100, irq 5 2 [Audio ]: USB-Audio - USB Audio USB Audio at usb-0000:02:00.0-1, full speed rudolf@64studio:~$ cat /proc /asound/modules cat: /proc: Ist ein Verzeichnis cat: /asound/modules: Datei oder Verzeichnis nicht gefunden rudolf@64studio

Plug it and type in the terminal: lsusb This list you current usb devices Again, do: cat /proc/asound/cards list of audio devices. cat /proc /asound/modules The alsa modules used. In Jack Control, make sure you are using the right interface. I hope this helps. Pablo

Google is your friend... To me it looks like the card should be plug and play.